Coarse sand

Modest_Man

Well-Known Member
Yes I did. Took a while to get all the silicone off the cracks but I have it clean, end of cracks are drilled, and I have filled/patched what I can with Weld-on. I need to place an order with TAP Plastics and purchase quite a bit to cover the whole bottom and dividers. It's a project for sure. Going to run a fluidized sump with K1 so I need to buy about $150 worth of media as well.

Here's the 5/16 Ozark Brown. Washed up really easily.

20190612_105308.jpg
 

FishBeast

Well-Known Member
Yes I did. Took a while to get all the silicone off the cracks but I have it clean, end of cracks are drilled, and I have filled/patched what I can with Weld-on. I need to place an order with TAP Plastics and purchase quite a bit to cover the whole bottom and dividers. It's a project for sure. Going to run a fluidized sump with K1 so I need to buy about $150 worth of media as well.

Here's the 5/16 Ozark Brown. Washed up really easily.

View attachment 5133
Color looks real good!
 
Top