FishBeast
Well-Known Member
Chipped out a hole towards the end of drilling. I’ll patch using glass with clean hole over the bad one, with a ton of silicone in between. 12mm glass, 2” hole on back panel... open to suggestions!
I knew the small glass pieces I bought from @Pleco Jim (or was it @Loren) would come in handy some day!
![2B1840BF-0326-4832-B8B2-B67D542710C0.jpeg 2B1840BF-0326-4832-B8B2-B67D542710C0.jpeg](https://www.wafishbox.com/forums/data/attachments/3/3833-5cdf093eef9b871a08e941e6ad796eab.jpg)
I knew the small glass pieces I bought from @Pleco Jim (or was it @Loren) would come in handy some day!
![7EA572D1-B978-4BEC-8460-1059EE469BE4.jpeg 7EA572D1-B978-4BEC-8460-1059EE469BE4.jpeg](https://www.wafishbox.com/forums/data/attachments/3/3832-311569ce25da6e330dccc92230b80d44.jpg)
![DD6FB223-E903-428D-BED7-7E2F1B858114.jpeg DD6FB223-E903-428D-BED7-7E2F1B858114.jpeg](https://www.wafishbox.com/forums/data/attachments/3/3834-6d03d55be98da0ba8627ef0c36d0b695.jpg)
![2B1840BF-0326-4832-B8B2-B67D542710C0.jpeg 2B1840BF-0326-4832-B8B2-B67D542710C0.jpeg](https://www.wafishbox.com/forums/data/attachments/3/3833-5cdf093eef9b871a08e941e6ad796eab.jpg)